ARONIT Kernspulen

Mundorf ARONIT-Spulen

No image available

With Aronite core coils, large inductors can be realized at low cost. Due to the core material used, they are even more similar to the behaviour of air-core coils than ferrite core coils, but the ohmic resistance is higher. They are used as low-cost bass coils, in oscillating circuits and equalizer networks. We advise against using them in the mid- and high-range.

Aronit is a new type of material based on sintered metal, which exhibits only extremely low distortion even at very high loads. This material, in combination with specially tuned coil bodies, makes coils with very low ohmic resistance and excellent price-performance ratio possible. Aronit chokes are used wherever high load capacity and low distortion are to be achieved at low cost.

Catalogues

Mcoil rod core coil A71
8.99 €*
8.99 € / 1 Stück
Mcoil rod core coil A71
Mcoil rod core coil A100
7.99 €*
7.99 € / 1 Stück
Mcoil rod core coil A100
Mcoil rod core coil A140
7.19 €*
7.19 € / 1 Stück
Mcoil rod core coil A140
Mcoil BL Rod core coil BA71
10.90 €*
10.90 € / 1 Stück
Mcoil BL Rod core coil BA71
Mcoil BL Rod core Coil BA100
10.90 €*
10.90 € / 1 Stück
Mcoil BL Rod core Coil BA100
Mcoil BL Rod core Coil BA140
8.99 €*
8.99 € / 1 Stück
Mcoil BL Rod core Coil BA140
Mcoil BL Rod core coil LA60
21.50 €*
21.50 € / 1 Stück
Mcoil BL Rod core coil LA60
Aronite coil, series E45, wire 1.00-1.32 mm
6.24 €*
6.24 € / 1 Stück
Aronite coil, series E45, wire 1.00-1.32 mm